Tar oil contains linseed oil, tar, and pine turpentine, as well as natural resin. Tar oil is absorbed into the wood where it inhibits the effects of rot, mould, and blue stain fungi. Tar oil gives the wood an attractive, transparent, and water-repellent surface. Consumption for sawn wood is between three and five litres per square metre and for planed wood and logs it is between five and ten litres per square metre.
Areas of application: Boats and berths, log houses, garden furniture, terraces and garden houses, heat-treated and vacuum-impregnated wood.
Ingredients: Pine turpentine, pine tar, linseed oil, natural resin
Colour: Brown, dark brown
Pre-treatment: It is important that the wood material that is to be treated is dry, with a maximum wood moisture level that is below 21% and a relative air humidity that is below 80%. Clean any old treatable surfaces of any dirt, mould, and removable materials. Prime the surface with Ecobase.
Instructions for use: No diluting required. Mix carefully before and during application. Apply the material in thin layers with a brush or piece of cloth and allow it to be absorbed. Excess material that is no longer being absorbed can be wiped off if necessary. Between one and four finishing layers will be required, depending on the quality of the wooden surface and its purpose of use. Finish end cuts of wood with special care. Tar oil may be tinted with pigment dye. A new finish should be applied after a year, if necessary.
Tar oil is not recommended for varnished or painted surfaces. Its use for any other purpose and contrary to the advice given here is not recommended.
Drying time: Thinly brushed, between one to seven days, depending on the substrate and weather conditions.
Cleaning equipment: Pine turpentine
Preventing environmental risks: Since rags and wood chips that have become contaminated with the product may ignite spontaneously, they need to be preserved by soaking them in water before disposal, or keeping them in closed tin containers, or burning them immediately.
The product must not be allowed to enter the soil, sewers, or any water body. Any leakage of fluid needs to be doused in sand or other non-combustible and absorbent material. Empty and dry packaging may be sent to packaging collection points or, if this is not possible, to a general landfill site. Liquid waste needs to be delivered to a collection point for hazardous waste or to another suitable collection point.
Storage: Does not require any special conditions.
Flammable. Poses a hazard to health if inhaled, ingested, or absorbed through contact with the skin. Provide good ventilation in the work place. Contact with skin may result in an allergic reaction. Irritating to eyes and skin. Keep out of reach of children! If ingested, do not induce vomiting; seek immediate medical help and show the product packaging or labelling.